Shuttle and Needle: Blocking done

I finally blocked the baby blanket that I recently finished.

For a blocking surface, I have these wonderful foam pads (just have to keep them locked away from our one cat, who is strangely attacted to them. Knitpicks sells some purple ones, but I got mine at Harbor Freight -- they were being sold as floor mats for making a workshop floor more comfortable. I'm pretty sure these are larger than the ones sold by KP, and the price was reasonable. The ones I have are nice and large, so I can make a good area for blocking.

The mats have a textured side and a smooth side, I assemble them with the smooth side up. I also have (not pictured) a set of brightly colored smaller ones that I got in the toy department of Wal-Mart, though I haven't seen them there since. They are usually sold as play mat puzzle pieces. Guess it would have been too much to ask for them to have the same cut outs as the ones from Harbor Freight. bit but they'll do in a pinch if I ever need a *really big* blocking area.

I lay something over the assembled mats to guard against any color bleed (a practice I started when I only had the brightly colored mats). I use either a clean towel or, as I did here, some white fleece I had left from an old project. It doesn't cover the mats, but it is big enough for the piece being blocked.

Once I have the mats laid out and covered, I started by inserting my blocking wires in the edges. Generally sold for lace blocking, I found these to be an excellent aid for blocking this little blanket -- it made it easier to get the edges nice and straight. First, just the wires

Then, I started pinning. I started at the corners working diagonally. Standing from the camera angle, first the close left corner, then the far right corner, then the far left then the close right. Next, I placed pins in the middles of the sides, pulling gently to pull the piece out to the size and shape intended. You can see the difference already. I didn't start with a wet blanket for this one, once it was stretched and pinned, I sprayed it with water until it was quite damp. Then, left it alone for two days.